Mr. Pink Foam Party Car Wash Starter Kit (2024)

FAQs

What is the dilution ratio for Mr Pink? ›

Mr. Pink is super concentrated for a 1:4000 dilution ratio. This means you only have to add 1 ounce of Mr. Pink to a 2 gallon bucket to achieve a perfectly clean surface.

Use this versatile car wash soap in any bucket wash, or add it to your high pressure foam cannon or foam gun to spray a thick blanket of cleansing foam for a touch-less car wash experience. Mr. Pink is super concentrated. Add just 1 ounce of Mr.

Its pH balance formula is also wax friendly, meaning it will not affect the durability of your wax or sealant. Chemical Guys Mr. Pink will thoroughly clean every surface on your vehicle while imparting a high-gloss shine.

In the scientific literature, if you see “1:2”, it means to add 1part to 2 parts. That will be 1 mL added to 2 mL, for a total of 3 mL, or a 1/3 dilution.

A ratio of 1:10 means add 1 part of product to 10 parts of water. A ratio of 1:25 means add 1 part of product to 25 parts of water. 10 capfuls of water. You can use a measuring jug and convert the ratio to units of liquid measure.

We recommend starting with a baseline mixture of 1:16, that is, 1 part concentrate to 16 parts water. Dirtier vehicles might benefit from 2:16 or 3:16 mixtures.

If using TORQ Foam Blaster 6, mix water with 1-3 oz of Mr. Pink in its soap solution bottle.

In many cases, you don't need to scrub vigorously after using a pressure washer foam cannon.

Tip 4: Rinse Your Car

By rinsing your vehicle, you are removing the largest dirt and debris, so they never have a chance to be rubbed into the paintwork. Simply rinse your car from top to bottom with your pressure washer, then, proceed to foaming your car.

Use these with Mr.

Can Mr. Pink be used in a foam cannon or foam gun? Yes, Mr. Pink will work amazing with a foam cannon, foam gun, and the two bucket method.

Is Mr Pink a good car wash soap? ›

Perfect car soap. If you like to keep you car clean and the small of bubblegum, this is the soap for you. Great foam and cleaning power and smells great too. Use it in a foam cannon and pressure washer for the best foaming and cleaning results.

A: Mr. Pink is safe to use on a vehicle with a ceramic coating. For best results, we recommend using HydroSuds to wash your vehicle with to make the best out of your coating.

Yes, this is safe to use on vehicles with ceramic coatings.

The procedure is straightforward: add the two numbers together and divide the total volume by that sum. For example, if your dilution ratio is 10 to 1 and you want to fill a 12-ounce bottle, you would add 10 and 1 to get 11. Then, divide 12 by 11 to calculate the number of ounces required for the dilution.

To make a fixed amount of a dilute solution from a stock solution, you can use the formula: C₁V₁ = C₂V₂ where: V₁ = Volume of stock solution needed to make the new solution. C₁ = Concentration of stock solution.

Dilution ratio refers to a simple dilution, in which a unit volume of a solute is combined with a desired volume of solvent. Dilution factor on the other hand refers to the ratio of the volume of the initial concentrated solute to the total volume of the final diluted solution.